Clevite CB-1413H Performance H-Series Rod Bearing for 89-02 Cummins 5.9L

Build your 1989-2002 Dodge 5.9L Cummins to hold up to the competition with the Clevite CB-1413H H-Series Connecting Rod Bearings. Clevite H-Series Connecting Rod Bearings were developed primarily for NASCAR type racing but are suitable for all types of competition engines. H-Series bearings have a medium level of eccentricity, high crush, and rod bearings have a hardened steel back and thin overlay. These bearings also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating.
 
Use Clevite H-Series Rod Bearings with crankshafts that have oversize fillets and where engines run in the medium to high RPM range. If you aren't sure which type of performance bearing to start with, the H series bearing will be your best choice for replacing your OEM rod bearings.
 
Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.

1989 Dodge 5.9L 12V Cummins
1990 Dodge 5.9L 12V Cummins
1991 Dodge 5.9L 12V Cummins
1992 Dodge 5.9L 12V Cummins
1993 Dodge 5.9L 12V Cummins
1994 Dodge 5.9L 12V Cummins
1995 Dodge 5.9L 12V Cummins
1996 Dodge 5.9L 12V Cummins
1997 Dodge 5.9L 12V Cummins
1998 Dodge 5.9L 12V Cummins
1998.5 Dodge 5.9L 24V Cummins
1999 Dodge 5.9L 24V Cummins
2000 Dodge 5.9L 24V Cummins
2001 Dodge 5.9L 24V Cummins
2002 Dodge 5.9L 24V Cummins

*May not work for all builds due to other engine/vehicle modifications Clevite H Series Connecting Rod Bearings Six Required for complete Rod Bearing Replacement